Cables

Lined end caps have an internal sleeve that extends out from the end. This liner protects the inner cable from the opening in the end cap, preventing cable coatings from wearing off and ensuring the lowest possible friction. Lined end caps can also be paired with a sealing liner or a dirt guard to keep dirt and grime out of the housing. Use lined end caps whenever you use Teflon-coated cables to protect the coating.

Stainless steel cables are extruded to provide a smooth, low-friction surface.

Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame

Replacement grub seals for Jagwire Elite Sealed kits. - Material: Rubber - 10 Pieces

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

Hooded end caps offer the greatest level of protection against contamination and are ideal for high contamination environments. - Rubber seal for areas that need the most protection - Alloy body

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

Shimano, SLR brake housing, 40m, Black

A great replacement for OE cables and a perfect way to bring style to a bike, the 1x Sport Shift kits make it easy. They come with a weld-cut single-ended Slick Stainless cable for easy installation with modern SRAM and Shimano shifters. The included housing uses our Slick-Lube liners to reduce friction, providing shifting precision and long-lasting performance. This kit is designed for use on bikes with a 1x drivetrain with a rear derailleur or internally geared hub. - Single-ended shift cable is compatible with SRAM and Shimano shift levers for both road or mountain bikes - Sport Slick Stainless cable combines with a Slick-Lube housing liner to offer dependable shifting performance and durability - Includes everything needed for a complete shift cable and housing replacement for a rear derailleur or internally geared hub - OEM-level cables and housing with high-quality small parts

Hydraulic hose with banjo fitting for TRP brakes.

Jagwire Elite Link housing is the ultimate combination of durability and attention-grabbing looks. Available in six eye-catching colors, they're designed to improve any bike's performance and appearance. 2x Elite Link Shift Kits are spec'd for use on road or mountain bikes that use both a front and rear derailleur. The housing uses a series of aluminum links to provide a compressionless system for precise shifting performance. But unlike typical compressionless housing, its flexibility allows for tight bends without kinking. It's also lighter than traditional linear strand shift housing while being more durable. Combine these benefits with Elite, ultra-slick polished cables and Slick-Lube liners, and you've got the best of performance and style. - Precise, compressionless shifting performance combined with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - Ultra-slick polished inner cables minimize system friction - Durable aluminum housing won't kink or rust and is 20% lighter than typical shift housing - Includes enough housing and end caps for a bike with both a front and rear derailleur, with split (non-continuous) cable housing - Bikes with continuous housing and/or extra-large frames may need additional links and/or liners; service parts are available separately

SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

- 4mm compressionless housing - Slick-Lube liner (SL) - Housing length: 50m

The Slic-Kable features a low friction inner wire for smooth braking. - 65-inch length

- Pre-lubed with special polymer compatible grease - Polymer-coated inner cable reduces the sliding resistance to achieve lighter and quicker operation - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur like material from polymer coating will not affect the performance - Ultegra grade SLR-EV Road brake cable set

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Tektro brakes and includes enough hardware for one bicycle.

- 5mm derailleur housing

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars

Includes - 1.5mm coated cables (1 x 850mm, 1 x 1750mm) - 5mm Kevlar-reinforced compression-free housing - Ferrules, end caps, frame protectors

SRAM's SlickWire MTB Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules, and frame protectors.

Cables are coated with a durable low-friction polymer. - Dupont Tefzel coating is more durable than previous coated cables - Length: 2350mm - Diameter: 1.6mm - Double Ended: No

- Front or rear brake - MTB specific - 1.5mm stainless cable

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire

Basics brake cables provide value on a budget. - Pre-stretched - Double ended for compatibility with SRAM/Shimano road and mountain brakes - Color: Silver - Diameter: 1.6mm

Rocket II direct cable adjusters fit into Shimano STI shifters with external shift cable routing. - Rubber coated adjusting knobs for firm grip - Adjustable on the fly - 4mm

Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm

Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1

Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.

SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the 2x Elite Link Shift Kit

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

- Complete ferrule and cable end kit - Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4) - Material: Aluminum

Includes: - 1.1mm elite cables (2 x 2300mm) - 4mm reinforced linear strand housing - Ferrules, end caps, frame protectors

Shimano, SP41, 4mm Shifter housing, 50m

Original equipment hydraulic hoses for no-compromise brake performance. - Hose Use: Front, Rear - Black - 2000mm hose length - Compatible with SRAM road hydraulic disc brakes