Filter By:

  • Show More Brands
  • Show Fewer Brands

Stems

Bontrager Rhythm Pro Factory Overstock Stem
$40.00 $99.99 60% Off
A lightweight, all-mountain stem with the burly attitude of a billy goat to tackle everything the mountain throws your way. All-mountain tough. XC light. No compromise. Bashing through rock gardens and nailing big hits puts incredible strain on a mountain bike stem. Luckily the super stiff, torsion-resistant body and wide faceplate of the Rhythm Pro stem is XC light and all-mountain tough ,providing you with more control of the trail. - 7050-T6, 3D, forged alloy construction - Wide, 4-bolt, alloy handlebar clamp - Opposing 2-bolt steerer tube clamp - Corrosion-resistant steel bolts - Designed for aggressive technical trail riding, but suitable for road or mountain use - Not for use on carbon steerer tubes - Safe for use on carbon handlebars - Go green and save green – Zero packaging means zero waste and zero extra cost
Cannondale 1.5-inch Stem
$40.00 - $65.00
Cannondale's 1.5-inch Stem comes in plenty of options to fine-tune the fit on your bike. This stem works with larger 1.5-inch steerers, frequently found on Cannondale's front-suspension bikes. Using Cannondale's One-Piece-Integration process, it's made of a single piece of durable, lightweight 2024 aluminum.
Salsa Guide Stem
$40.00
Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40
Salsa Guide Trail Stem
$40.00
The Guide Trail Stem is lightweight, durable, and provides excellent steering response. Available in super short lengths for use on new-school trail bikes with wide bars, short rear ends, and long front-center geometry. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 31.8mm bar clamp - Bead-blasted, then anodized, finish
TruVativ Stylo T20 Stem
$40.00
TruVativ's Stylo T20 stem is 3D forged for that perfect balance of light weight, stiffness and control on the trail. Four bolts securely attach the face plate and make changing out handlebars a breeze.
Velo Orange Tall-Stack Stem
$40.00
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
Whisky Parts Co. No. 7 Mountain Stem
$40.00 - $45.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
Whisky Parts Co. No. 7 Stem
$40.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Profile Design H2O Quill Stem
$44.99
A little H2O is a crucial part of every ride! This sweet stem is made of 6061-T6 aluminum for a light, strong ride. Cold 3D forging adds strength and a nice finish.
Race Face Chester 35
$44.99
RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Stack Height: 42mm
Sunlite Adjustable Sport Quill Stem
$44.99
• Forged aluminum • 2-bolt clamp • 180mm tall
Spank Spike Race Stem
$45.00
A favorite of FMB Freeride pros, All Mountain warriors, and Enduro racers alike, the SPIKE Race Stem blends tough and sexy seamlessly. 2D Forged for ultimate strength, then CNC weight-optimized in every way, the SPIKE Race Stem might be a lightweight, but its iconic hourglass sectional profile lends the immense torsional stiffness required by SPANK's pros. The burly 31.8mm bar clamp zone is chamfered to reduce stress risers and increase fatigue life in handlebars. Available in super-short 35mm or conventional 50mm lengths, with a minimal stack height, the SPIKE Race Stem brings style and confidence to any ride. - Key technologies: MGR, chamfered bar clamp, "Snap Fit" sealed top cap - Material: 2D Forged MGR Alloy, CNC Weight Optimized - Length (mm): 35 / 50 - Rise: 0° - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): ±150 (35mm) / ±180 (50mm) - Finish: polish anodized, CNC/laser logos - Technologies: MGR - Discipline: race / freeride
Profile Design Aris OS Road Stem (+/-25-degree rise)
$47.49
Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
Profile Design Aris Road Stem (+/-25-degree rise)
$47.49
Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
Spank Spike Director 2 Stem
$49.90
- Proven alloy strength and security for racing or freeriding - 2D forged alloy body and wide, chamfered bar-clamps offer unparalleled support to handlebars, enhancing safety and longevity in your DH cockpit - Shot peened and anodized for high strength and low weight - CNC weight optimized for 31.8 bars - Key Technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy, CNC Weight Optimized - Length: (mm) 50 - Rise: (°) 15 - Diameter (mm): 31.8 - Stack Height (mm): N/A - Weight (g): ±150 - Finish: Shotpeen anodized, laser logos
Spank Spike Race 2 Stem
$49.90
- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos
Bontrager Rhythm Comp Knock Block Stem-No Packaging
$49.99
Run your favorite 31.8mm clamping diameter handlebar on a bike with Knock Block with the Rhythm Comp 31.8. It adds Knock Block compatibility to a durable stem with multiple lengths to let you fine-tune the fit to your ride. Get 31.8mm handlebar compatibility with your Knock Block system;Also compatible with standard headsets and spacers;Knock Block system protects frame from impacts by fork and handlebars by eliminating over-rotation of bars;Available in a wide range of sizes for today's mountain rider;See Service Parts for other Knock Block parts;
Bontrager Rhythm Pro Direct Mount Stem
$49.99 $99.99 50% Off
Downhillers rejoice! Bontrager has a stem for you. Maintain confident control on screaming runs down the gnarliest lines with the durable and strong Rhythm Pro Direct Mount Stem. Made from strong and lightweight 6061 aluminum, this stem features a hefty 4-bolt attachment to the fork, and a 4-bolt, dual-band clamp for a confident interface with the bars. Key features: - Constructed of 7050 alloy - 4-bolt direct mount for dual crown forks - 4-bolt dual band clamp securely holds handlebar - Uses M6 corrosion-resistant steel bolts with 8Nm torque spec - Safe for use with alloy or carbon handlebars
FSA Afterburner MTB Stem
$49.99
The Afterburner MTB Stem is 3-D forged and CNC machined from AL6061/T6. You have the option to run this stem at a + or – 6-degrees to suit your racing style. - 3D forged and CNC machined from AL6061/T9 - 4-bolt cold forged front clamp - 40mm clamp stack height - Weight: 149g
Promax Banger Stem
$49.99 - $69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
Promax Impact Mini Stem
$49.99
There's no reason a bantam-sized rig shouldn't have the advantages a top-notch stem provides. Promax's Impact Mini Stem fits the bill with rock-solid bar clamping, stunning good looks, and the stiffness to nab the holeshot and keep it on-line through the berms. Set that mini up right! - Cold-forged and CNC-machined from 6061-T6 aluminum alloy - Top-load clamp design - Fits 1-inch steerer tubes
Promax Impact Stem
$49.99 - $69.99
The Impact is Promax's top-load BMX stem. They come in 48-, 53-, and 60-millimeter extensions and are cold-forged from the highest quality 6061-T6 aluminum then CNC-machined to refine the shape and further reduce weight. The “open” design keeps weight low while maintaining plenty of strength and ensuring your bars stay put. - Weight: 9.8oz. - Stack height: 30.5mm
Race Face Aeffect 35 Stem
$49.99
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)
Race Face Respond
$49.99
RaceFace designed their Respond stem for DH/AM riders seeking big hit performance at an All Mountain weight and beer budget cost. It's engineered to offer an optimal combination of strength, stiffness, and weight. - Forged & blasted 6061 aluminum for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which could cause your bar to bend or break
Race Face Chester Stem
$54.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
Zipp Service Course Stem
$56.00
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
TruVativ Stylo T30 Stem
$59.00
TruVativ's Stylo T30 Stem is 3D forged from 7050 aluminum for that perfect balance of low weight, stiffness and precision steering control uphill or downhill. Four bolts securely attach the face plate and also make changing out handlebars a breeze.
Pro PLT Stem
$59.99
- 3D forged AL-2014 construction - Sizes: 50 - 130mm, 10 deg. angle - Suitable for 1-1/8" forks - Diameter handlebar clamp: 31.8mm - Headlock system for a secure front clamp fixation
Race Face Aeffect R 35 Stem
$59.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
Radio Axis Stem
$59.99
Based on our famous Crystal stem, the Radio Axis stem is CNC machined out of the highest quality 6061-T6 alloy, lifts your bars nice and high, and prevents them from slipping due to our wider 48mm clamping area and the larger head 6mm bolts. The choice of most of our team, this beauty now comes in a wild Sandblasted Purple finish.