Other

Take better care of your cycling clothes with Assos' Active Wear Cleanser. Utilizing a mild, PH-neutral formula, this tech cleanser preserves delicate fabrics, enhances breathability, keeps colors sharp, and neutralizes odors to keep your high-performance garments performing at their best, so you can, too.

A neoprene pogie designed to allow riders to change positions from hoods to drops without removing hands from the mitts. Internal or external cable routing options. - Water-proof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars and can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes

A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands

A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - Measures 11" wide by shifters/brakes

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam

EBike Handlebar Cover - Protects handlebars and controls while transporting on bike rack - Strong and lightweight: made of rip stop nylon with PU coating - Easy to attach: uses straps & zipper - Universal: fits handlebars to 82cm (32 inches) - Protection: Keep your expensive controls safe from the elements

- Universal neoprene motor cover protects E-Bike motor, drive from dust, water, & elements. - For use while in storage or transporting on car rack. NOT FOR USE WHILE RIDING. - Easy Installation with stretchable neoprene and hook and loop.

Disc Brake Covers are protecting your bike disc brakes during maintenance or transit. A must have addition for mounting your bike on a car rack and for clean up to keep your rotors clean and protected. Our Disc Brake Covers are made from breathable neoprene material that enables you to simply rinse them off and reuse them. Attaching is a snap with the 2 zippers on each cover.

Protects Your Battery From The Rain, Snow and Keeps the Battery Insulated - Insulates battery to help operate more efficiently - Protection against the elements while riding or transporting on a car rack - Scratch protection - Pocket for phone (keys or wallet) - 4mm neoprene black - Medium: Fits diameters 3.5" to 4.5" in diameter - Large: Fits surface-mounted battery and is compatible with Bosch, Shimano Steps, Samsun, Yamaha.

Insulated, flame resistant, water resistant cover for battery on E-Bike. Keeping your battery at normal operating temperatures improves performance and battery life. Also, protects the battery from rain, sun, and elements while on car rack. - Made with water-resistant nylon - polyester on outside for excellent water resistance. - Inner material made with fire and flame-resistant materials (passes FMVSS 302 Flame Test) - Fits surface-mounted battery and is compatible with Bosch PowerPack, Shimano Steps, Samsung, Yamaha - Pocket on top to keep small items close at hand. - Mounts with drawstring and hook and loop.

Ebike or Bike Cover to protect your bike from the elements. Made with 300D Ripstop Nylon with water resistant coating. Fits most ebikes, fat tire, and 29" wheeled bikes. - Cinch straps included to tighten cover against bike & heavy-duty elastic drawstring - Cover is 73” x 34” x 44” high (height at the handlebars) - Zippered opening for easy access to battery and bike - Metal Grommets to use with bike lock - Reflective handles and trim - Convenient carry bag Note: Due to the large number of vehicle makes/models, state laws, different hitch mounts, size of bikes, we do not guarantee the cover will not obstruct rear view vision. It is the responsibility of the buyer to ensure they are following state laws and mount bikes that are safe for travel.

Completely encloses the bikes and seals at the hitch so you can rest easy knowing rain, road debris, and inclement weather will not wear on your bikes. Made Heavy Duty translucent reinforced scrim material that encloses the entire bike. Perfect for road trips for the back of your RV, Van, Truck, SUV, Trailer, or Vehicle. Fits standard and extended wheel base bikes. - Adjustable: Fits 1 or 2 bikes with adjustable straps. - Protects: Bike are safe from UV, water damage and debris. - Easy to Install: Fits almost any hitch-mounted bike rack, designed for large SUVs and RVs. Included bungee straps must be used to securely strap down extra material, failure to do so could cause unneeded air drag and cover damage. - Size: 80" (L) x 36" (W) x 50" (H) Note: Due to the large number of vehicle makes/models, state laws, different hitch mounts, size of bikes, we do not guarantee the cover will not obstruct rear view vision. It is the responsibility of the buyer to ensure they are following state laws and mount bikes that are safe for travel.

Keep your bike safely upright and at the ready with the Bontrager Adjustable Bracket-Mount Kickstand. The included hardware and mounting plate makes installation simple, and the center-mount design works with most bikes. Adjustable length adapts for bikes with 24" to 29" wheels and provides a stable upright position. - Center-mount design uses a top plate to clamp the kickstand to the frame near the bottom bracket - Adjustable height fits bikes with wheel sizes ranging from 24" to 29" - Sturdy alloy construction - Includes all required hardware and mounting plates

An adjustable rear-mount kick stand that fits bikes of all sizes, from 24 inch to 29 inch wheels. Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. Product details - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware

• Designed for flat-sided tubes up to 23mm thick • Firm spring prevents movement while riding • Two bracket options to better fit small and large frames

Built for Si dropouts. A durable kickstand for Cannondale Si dropouts that is stylish and smartly equipped. Where it thrives: Leisurely rides, in town What it's built for: Durability Highlights: - Stylish and sleek - Light and strong alloy construction - Flat/post brake mount compatible

Clear stick on chainstay and frame protectors.

Electra's Aluminum Bolt-On Kickstand makes it easy to park your bike upright.

The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS5 is a center-mounted kickstand. The kickstand is constructed from aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Includes extra long bolt - Kickstand can be cut to a specific length - For bikes without factory mounting plate (includes top plate and bolt)

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - For bikes without factory mounting plate (includes top plate and bolt) - 285mm (for bikes 22" and under) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

Introducing the Piston® Pro X LICENSE PLATE MOUNT. Simply remove the endcap, and attach the mount to achieve unparalleled visibility on the road. Upgrade your ride and hit the road with confidence and style. - For use with Piston® Pro X - Billet machined aluminum - Rotates for use in stowed or in-use position - Black Anodized