Key features: - Replacement strap for buckled Bontrager Road and MTB shoes - Compatible with 2009-2015 shoes, or all straps with this shape - Sold in singles - For optimal hold, it's highly recommended to also replace the buckle
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
Wear down the bottom of your shoes from too much cycling? The Toe and Heel Pad Set includes 4 pieces of rubber for a pair of your favorite Bont shoes along with screws to keep them in place.
Key features: - Compatible with all BOA equipped Bontrager shoes except Circuit and Sonic - Mix-and-match buckle and shoe colors to get a unique and customized look - Left/right specific design - BOA IP1 dial kits include dial, 1m of lace, T6 tool, and instructions - Red dials only include the dial - no lace - For additional service/warranty information visit: www.boatechnology.com
Key features: - Genuine replacement heel studs for your Bontrager road shoes - Maintains traction when walking off-the-bike - Includes mounting screws
The Keo Cover protects your cleats while walking. They are compatible with all Keo Grip cleats and Keo Cleats. – Cleats protection – Anti-slip – Compatible with all cleats
The classic must-have ELITE Thermal Toe Covers are updated with reflective logos. Features: ELITE Softshell provides superior wind and water protection Simple pull-on design Reflective elements for low–light visibility Recommended for road shoes with external cleats Top: 70% nylon, 15% spandex, 15% polyurethane, Bottom: 93% nylon, 7% spandex, Imported.
Need to replace your buckle? Bont's Slimline Buckle Kit includes a pair of buckles, loop, a pair of 9 cm ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Slimline buckle with a Standard buckle.
Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.
The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out. - Weight: 44g/pair
The Xpresso Free float cleats have been developed for the TIME Xpresso Road bike pedal range. They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. You can also adjust the Q-factor (by switching the cleats), in order to optimize performance following 3 points: security, ergonomics and performance. The Bi-material brings more durability when walking with the cleats. - Weight: 85g/pair
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Get the advantage of more grip with the Sabertooth Toe Spike Kit. The super-strong forged aluminum design easily mounts to any mountain bike shoe with front toe ports for a tighter grip when navigating cyclocross barriers, run-ups, and any off-bike section in less than ideal conditions. Key features: - Aggressive, earth-churning design - Made from precision forged stainless steel - Includes stainless steel mounting hardware
Bontrager inForm BioDynamic insoles with Superfeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of pain-free pedaling. Models are color-coded: Red is low; Yellow is mid; Blue is High. - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch Pillar provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - inForm BioDynamics—Optimizes natural movement for sustained, higher performance
Pearl Izumi's thinnest, lightest and most aerodynamic shoe cover is perfect for racing or riding in cool, windy conditions. It's made with a breathable P.R.O. Barrier Lite fabric that stretches to optimize your aero advantage while keeping your feet dry and comfortable. It also features a zippered rear closure for improved aerodynamics. Features: - P.R.O. Barrier Lite fabric provides lightweight wind protection and water resistance - Wind tunnel tested for aerodynamics - Zippered heel closure for improved fit and improved aerodynamics - Recommended for road shoes with external cleats - Upper: 50% nylon 40% polyurethane 10% elastane; Bottom: 59% nylon 25% Kevlar aramid 16% polyurethane; Imported
For optimum power transfer to the bike, leg power needs to be effectively converted into propulsion. The IP3 insoles from Ergon support and stabilize the power transfer from the legs and feet straight to the pedals. Due to the patented stabilization delta, a natural foot position is achieved through three points resulting in an efficient and comfortable motion sequence while pedaling. Made in Germany and developed with insole specialist Solestar.
Extend your cycling season Round out your cycling wardrobe with one of our most popular autumn road products. The S1 Softshell Shoe Cover keeps you warm, dry, and protected in rainy or dry conditions above freezing. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Visibility colorway uses biomotion to help improve daytime detectability - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective elements enhance visibility during nighttime riding
Flat Pedal Friendly Mud Protection - Super tough, nylon faced neoprene upper with highly durable overlays - Novel, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section tread for added grip - Rear Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Reflective trim - Clean shoes, clean lines, muddy trails - Tight fit = clean shoes - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
Beautiful biomotion The Halo S1 Softshell Shoe Cover is your answer for day and night detectability at temps at or above 30-degree F/-1-degree C. With both high-viz color and reflective material in a single garment, Halo provides ultimate visibility, day or night. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Softshell fabric for water resistance and windproof protection in cold and wet conditions - Provides biomotion visibility to ensure you're seen by motorists day or night - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance bio-motion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures
Warm feet are happy feet Extend your riding season with the S2 Softshell Shoe Cover. Designed specifically for insulation and weather protection over your regular footwear, this cover will keep your feet warm and dry in temps below 30°F/-1°C. Key features - Choose the right gear for your climate—S1 for above freezing, S2 for below - Profila Neoprene for insulation and protection in cold and wet conditions - YKK zipper for easy on/off - Designed for use with road or mountain shoes for maximum versatility - Reflective main materials enhance biomotion visibility for maximum safety - Fitted cut provides streamlined shoe fit even with dial and buckle closures Details - Fiber Content: 79% Rubber / 15.5% Nylon / 5.2% Polyester / 0.3 Polyethylene
Designed for the nastiest, frigid conditions, the Pearl Izumi P.R.O. AmFIB WxB Shoe Covers transform your road shoes, allowing them to thrive year round. Primaloft Gold insulation and P.R.O. Barrier WxB fabric with an Outdry membrane provides waterproof, breathable coverage to keep feet toasty. Kevlar bottoms and rubber reinforcements on the toes add durability to the high-wear areas. The best part: Pearl's patented two-stage hook-and-loop closure makes these covers easy to put on and take off, while ensuring a snug fit against both your shoe and ankle. Features: - P.R.O. Barrier WxB powered by Outdry provides optimal water protection by bonding the waterproof, breathable membrane directly to the interior of the shell fabric - 100g Primaloft Gold insulation provides optimal warmth without bulk - Updated two-stage hook and loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - Kevlar road bottom spreads open for easy on and off while providing superior durability - Recommended for road shoes with external cleats - Reflective elements for low-light visibility - Shell: 100% polyester; Insulation: 100% polyester; Bottom: 59% nylon 25% Kevlar aramid 16% polyurethane
Page 1 of 1